NASA
NASA’s Hubble Pauses Science Due to Gyro Issue
2 min read
NASA’s Hubble Pauses Science Due to Gyro Issue The Hubble Space Telescope as seen from the space shuttle Atlantis (STS-125) in May 2009, during the fifth and final servicing of the orbiting observatory. NASAUpdated April 30, 2024
Editor’s note: On April 30, 2024, NASA announced it restored the agency’s Hubble Space Telescope to science operations April 29. The spacecraft is in good health and once again operating using all three of its gyros. All of Hubble’s instruments are online, and the spacecraft has resumed taking science observations.
Published April 26, 2024
NASA is working to resume science operations of the agency’s Hubble Space Telescope after it entered safe mode April 23 due to an ongoing gyroscope (gyro) issue. Hubble’s instruments are stable, and the telescope is in good health.
The telescope automatically entered safe mode when one of its three gyroscopes gave faulty readings. The gyros measure the telescope’s turn rates and are part of the system that determines which direction the telescope is pointed. While in safe mode, science operations are suspended, and the telescope waits for new directions from the ground.
This particular gyro caused Hubble to enter safe mode in November after returning similar faulty readings. The team is currently working to identify potential solutions. If necessary, the spacecraft can be re-configured to operate with only one gyro, with the other remaining gyro placed in reserve . The spacecraft had six new gyros installed during the fifth and final space shuttle servicing mission in 2009. To date, three of those gyros remain operational, including the gyro currently experiencing fluctuations. Hubble uses three gyros to maximize efficiency, but could continue to make science observations with only one gyro if required.
NASA anticipates Hubble will continue making groundbreaking discoveries, working with other observatories, such as the agency’s James Webb Space Telescope, throughout this decade and possibly into the next.
Launched in 1990, Hubble has been observing the universe for more than three decades and recently celebrated its 34th anniversary. Read more about some of Hubble’s greatest scientific discoveries and visit nasa.gov/hubble for updates.
Media Contact:
Claire Andreoli
NASA’s Goddard Space Flight Center, Greenbelt, MD
claire.andreoli@nasa.gov
Since its 1990 launch, the Hubble Space Telescope has changed our fundamental understanding of the universe.
Juno
NASA’s Juno spacecraft entered orbit around Jupiter in 2016, the first explorer to peer below the planet’s dense clouds to…
Science News
James Webb Space Telescope
Webb is the premier observatory of the next decade, serving thousands of astronomers worldwide. It studies every phase in the…
NASA Grants Support Academic Collaborations for STEM Student Success
NASA has awarded $3.9 million to 13 teams at under-resourced academic institutions across the country, to support collaborative projects with NASA that offer students mentorship and career development in science, technology, engineering, and math.
This is the second round of seed funding awards given through the agency’s Science Mission Directorate (SMD) Bridge Program, which was established in 2022 to improve diversity, equity, inclusion, and accessibility in the science and engineering communities, as well as NASA’s workforce.
“We are thrilled to welcome 13 new teams into our community,” said Padi Boyd, director, SMD Bridge Program at NASA Headquarters in Washington. “We look forward to nurturing these collaborations between faculty and NASA researchers, while supporting the development of the next generation of researchers.”
NASA’s SMD Bridge Program funds research projects at academic institutions – including Hispanic-serving institutions, historically Black colleges and universities, Asian American and Native American Pacific Islander-serving institutions, and primarily undergraduate institutions – that build or strengthen relationships with NASA. The projects offer hands-on training and mentorship for students that will help them transition into graduate schools, employment at NASA, or STEM careers.
In February, the program awarded a first round of seed funding to 11 teams. This second cohort of grant recipients includes 13 teams with projects connected to seven NASA centers. A third round of seed funding will be awarded this summer.
The following projects were selected as the second cohort to receive seed funding:
“Bubble Trapping and Ullage Formation in an Acoustic Field”
Principal investigator: Kevin Crosby, Carthage College
This project, a collaboration between Carthage College and NASA’s Johnson Space Flight Center in Houston, will offer undergraduate students hands-on activities and training related to microgravity fluids and liquid propellant transfer, as well as the opportunity to work with high-school and middle-school students at under-resourced schools.
“Expanding Heliophysics Scientific Discovery through HelioAnalytics”
Principal investigator: M. Chantale Damas, Queensborough Community College
This project continues a collaboration between Queensborough Community College of the City University of New York and NASA’s Goddard Space Flight Center in Greenbelt, Maryland, to engage students in research that emphasizes the use of computer science, machine learning, and statistics to expand the discovery potential of Heliophysics data, models, and simulations.
“Enhancing Ice Cloud Retrieval Through Multitask Machine Learning”
Principal investigator: Leah Ding, American University
This collaboration between American University in Washington and NASA Goddard will develop machine learning techniques for analyzing satellite data to retrieve information about ice clouds, with interdisciplinary research and mentorship opportunities for students.
“Analysis of Abiotic/Primordial Peptides with Noncanonical Amino Acids”
Principal investigator: Jay Forsythe, College of Charleston
Student research and internship experiences through this project, a collaboration between the College of Charleston and NASA Goddard, will investigate how amino acid diversity affects chemical analysis, in support of research into the origins of life.
“Facilitating Undergraduate Research Through the Development of Novel Gravity Gradiometers”
Principal investigator: Charles Hoyle, Humboldt State University Sponsored Programs Foundation
This collaboration between Cal Poly Humboldt and NASA Goddard will support students with training, mentorship, and research in the development of novel gravity gradiometers for Earth science and fundamental physics investigations.
“Supporting Opportunities for Cooperative Climate Education and Research at
Fond du Lac Tribal and Community College (SOCCER @ FDLTCC)”
Principal investigator: Carl Lemke Oliver Sack, Minnesota State Colleges and Universities
This project will strengthen relationships between Fond du Lac Tribal and Community College, local tribal agencies, NASA Goddard, and NASA’s Langley Research Center in Hampton, Virginia, to support students with mentorship and training in snow research, including how to accurately observe snow throughout the season in various landscapes.
“Bridging NASA and Cal State LA Partnerships for Research Capacity Building in Remote Sensing”
Principal investigator: Jingjing Li, California State University, Los Angeles
California State University, Los Angeles, will collaborate with NASA’s Jet Propulsion Laboratory in Southern California (JPL) in this project to strengthen research capacity and student mentorship and training opportunities in the field of remote sensing, including applications for pre- and post-wildfire analysis.
“Fusion of Lidar 3D Vegetation Structure Measurements and a Terrestrial Biosphere Model for Improved
Predictions of Current and Future Land Carbon Dynamics”
Principal investigator: Wenge Ni-Meister, Hunter College
This collaboration, a project between Hunter College of the City University of New York and NASA’s Goddard Institute for Space Studies in New York (GISS), will offer student training as it aims to link lidar remote sensing of vegetation with modeling to improve our understanding of Earth’s ecosystem change.
“Assessment and Development of Surface Coatings for Multifunctional Shape Memory Alloys (SMAs)”
Principal investigator: Josiah Owusu-Danquah, Cleveland State University
This multidisciplinary project with Cleveland State University and NASA’s Glenn Research Center in Cleveland will advance student research and education in the field of advanced materials, focusing on surface coating materials that satisfy requirements for space systems and structures.
“Student Construction and Deployment of Low Cost Sensor Network in Whittier, California”
Principal investigator: Peter Peterson, Whittier College
This project, a collaboration with Whittier College and NASA’s Ames Research Center in California’s Silicon Valley, focuses on hands-on learning for students in the use of low-cost sensors and satellite-based measurements to study regional air pollution.
“High Density Capacitive Energy Storage Using Multi-Layered Polymer-2D Nanofillers Heterostructure for Space Application”
Principal investigator: Nihar Pradhan, Jackson State University
This collaborative project between Jackson State University and NASA JPL will offer undergraduate and high-school students research and training opportunities in the field of next-generation polymer-nanocomposites for energy storage.
“Astrobiology Scholars Program Immersive Research Experience (ASPIRE)”
Principal investigator: Andro Rios, San Jose State University Research Foundation
This project, a collaboration between Skyline College, San Jose State University, and NASA Ames, will give students an opportunity to conduct research that contributes to two pillars of astrobiology: origins of life and exobiology.
“Fire & Air: Burning Issues in the Central Valley: Unraveling Fire’s Influence on Air Quality, Fuel Mapping, and Carbon Dynamics”
Principal investigator: Wing To, California State University, Stanislaus
This collaboration between California State University, Stanislaus, and NASA Ames will offer a multi-tiered mentorship and research program for students, as well as a year-long undergraduate program, to study ground-based air quality and wildfire fuel mapping.
Learn more about the SMD Bridge Program at:
https://science.nasa.gov/researchers/smd-bridge-program/
-end-
Alise Fisher
Headquarters, Washington
202-358-2546
alise.m.fisher@nasa.gov
International Space Station Program Manager Dana Weigel
NASA’s Commitment to Safety Starts with its Culture
5 min read
Preparations for Next Moonwalk Simulations Underway (and Underwater) Brad Flick, center director at NASA’s Armstrong Flight Research Center in Edwards, California, amplifies the center’s safety commitment during Safety Day on April 2, 2024, at NASA Armstrong.NASA/Steve FreemanNASA works on projects that often have never been done, or perhaps the way they are being done has never been tried. Living on the edge of innovation requires a high degree of risk. After organizational silence led to the loss of space shuttle Challenger and its crew in 1986, NASA vowed to change the culture and make safety its priority.
Allowing unimaginable levels of innovation requires a balance with limiting risk that is inherent in exploring the unknown on Earth and beyond. NASA centers promote a culture of safety through a steady drumbeat of messages, trainings, and mechanisms to report unsafe conditions. In a recent demonstration of this culture, NASA’s Armstrong Flight Research Center in Edwards, California, hosted a Safety Day on April 4 that featured speakers highlighting NASA safety culture and the need to be vigilant about safety not only at work, but at home.
Kicking off the event was Brad Flick, NASA Armstrong center director. “Safety is our number one core value, and these events exemplify that.” Flick said. “We’re in a job that has risk. The hardest part is balancing the work with the responsibility to all of us and the public to do it safety.”
Organizational culture and climate are key factors in a safe work environment. That’s why NASA Safety Culture seeks to create an environment where everyone works safely, feels comfortable communicating safety issues, feels confident balancing challenges and risks while keeping safety in the forefront, and trusts safety is a priority across the agency.
“Culture is the way work gets done,” said Bob Conway, NASA Safety Center deputy director at the safety event. “Everyone is a leader. No accident occurs in the moment. It is the result of a series of events that may be years in the making.”
Bob Conway, NASA Safety Center deputy director, explains key factors in a safe work environment include organizational culture and climate. He presented during Safety Day on April 4, 2024, at NASA’s Armstrong Flight Research Center in Edwards, California.NASA/Steve FreemanMaintaining the culture requires more than just trainings throughout the year. NASA employees are routinely encouraged to report any of their concerns, positive safety behavior is rewarded and often awarded, and they have flexibility in responding to the unexpected. NASA considers this focus on safety part of its DNA.
Conway also recalled the X-31 experimental aircraft that flew at NASA Armstrong in the 1990s. The usual probe that measures key flight data like airspeed, altitude, and outside temperature, was changed to a probe without a heater that would have prevented icing. The change was not communicated well and the result on an unusually cold morning was the sensor froze, causing the flight computers to receive incorrect data. The aircraft became uncontrollable, the pilot was injured while ejecting, and the aircraft was lost.
“It is natural to rationalize shortcuts, engage in group think or be silenced by it, or to choose defensive silence,” Conway said. “We need to reverse that thought process by thinking what the risk is of not speaking up.”
Conway emphasized the need to be present, invite dialogue, encourage group members to think critically and speak up, discuss ideas outside the group, and have a team member play devil’s advocate to identify items others may overlook.
Also important in developing a solid safety environment is managing heavy workloads and recognizing when stress is on the rise. “Several projects had safety standdowns to talk about safety,” said Peggy Hayes, acting NASA Armstrong Safety and Mission Assurance director. “I think we do that well.”
This fiscal year, NASA Armstrong has zero lost-time accidents, or those accidents that require people to miss work. “People feel free to come to us, or call the Safety office,” Hayes said. “I think because we are a small center, where people routinely see leadership, it helps them bring their concerns forward.”
Another element of safety is what happens outside of work. Timothy Risch, a NASA Armstrong technical manager, cautioned people should prepare for and be ready to survive a serious accident. While walking to a store to return a movie, Risch heard a loud bang and saw a car crash into a light pole nearby. The 1,100-pound pole fell on his shoulder, hit his knee, shattered his fibula, ankle, and three bones in his foot. He had a 4-inch cut and a compound fracture.
Timothy Risch, a technical manager at NASA’s Armstrong Flight Research Center in Edwards, California, cautions people should prepare for and be ready to survive a serious accident. He presented during Safety Day on April 4, 2024, at NASA’s Armstrong Flight Research Center in Edwards, California.NASA/Steve Freeman“Prepare mentally and emotionally that you may need help if you are hurt,” he said. “I carried an identification card with me that had my key information on it such as my address, medical conditions, and medications. I had it with my license.”
Safety Day also included Elissa Dawson, NASA Armstrong emergency management specialist, who highlighted emergency response at the center, and Taylor Dirks, a wellness nurse for Blue Cross, Blue Shield California Federal Employee program, who focused on mental health and how resilience provides tools to manage everyday life challenges.
NASA’s dedication to a safety culture was born out of tragedy and the agency has send decades focusing its intensions to ensure employees can push the boundaries of what’s possible without sacrificing their safety. That model doesn’t have to be unique to NASA, it’s a culture that all businesses and industries can benefit from.
Elissa Dawson, an emergency management specialist at NASA’s Armstrong Flight Research Center in Edwards, California, highlights emergency response at the center. She presented during 4 Safety Day on April 4, 2024, at NASA Armstrong.NASA/Genaro Vavuris Share Details Last Updated Apr 29, 2024 EditorDede DiniusContactJay Levinejay.levine-1@nasa.govLocationArmstrong Flight Research Center Related Terms Explore More 6 min read Innovation that Impacts All NASA Missions: Improving How We Engineer Our Systems Article 1 day ago 4 min read Identification of Noise Sources During Launch Using Phased Array Microphone Systems Article 4 days ago 3 min read Trajectory Reverse Engineering Article 4 days ago Keep Exploring Discover More Topics From NASAArmstrong Flight Research Center
Armstrong Capabilities & Facilities
NASA Safety Center
Aircraft Flown at Armstrong
NASA/JAXA’s XRISM Mission Captures Unmatched Data With Just 36 Pixels
3 min read
NASA/JAXA’s XRISM Mission Captures Unmatched Data With Just 36 PixelsAt a time when phone cameras are capable of taking snapshots with millions of pixels, an instrument on the Japan-led XRISM (X-ray Imaging and Spectroscopy Mission) satellite captures revolutionary science with just 36 of them.
“That may sound impossible, but it’s actually true,” said Richard Kelley, the U.S. principal investigator for XRISM at NASA’s Goddard Space Flight Center in Greenbelt, Maryland. “The Resolve instrument gives us a deeper look at the makeup and motion of X-ray-emitting objects using technology invented and refined at Goddard over the past several decades.”
XRISM (pronounced “crism”) is led by JAXA (Japan Aerospace Exploration Agency) in collaboration with NASA, along with contributions from ESA (European Space Agency). It launched into orbit last September and has been scrutinizing the cosmos ever since. The mission detects “soft” X-rays, which have energies up to 5,000 times greater than visible light. It will probe the universe’s hottest regions, largest structures, and objects with the strongest gravity, like supermassive black holes in the cores of distant galaxies.
XRISM accomplishes this with an instrument named Resolve.
The square structure at the center of this image shows the 6-by-6-pixel microcalorimeter array at the heart of Resolve, an instrument on XRISM (X-ray Imaging and Spectroscopy Mission). The array measures 0.2 inches (5 millimeters) on a side. The device produces a spectrum of X-ray sources between 400 and 12,000 electron volts — up to 5,000 times the energy of visible light — with unprecedented detail. NASA/XRISM/Caroline Kilbourne“Resolve is more than a camera. Its detector takes the temperature of each X-ray that strikes it,” said Brian Williams, NASA’s XRISM project scientist at Goddard. “We call Resolve a microcalorimeter spectrometer because each of its 36 pixels is measuring tiny amounts of heat delivered by each incoming X-ray, allowing us to see the chemical fingerprints of elements making up the sources in unprecedented detail.”
In order to accomplish this, the entire detector must be chilled to 459.58 degrees below zero Fahrenheit (minus 273.1 degrees Celsius), just a whisker above absolute zero.
The instrument is so precise it can detect the motions of elements within a target, effectively providing a 3D view. Gas moving toward us glows at slightly higher energies than normal, while gas moving away from us emits slightly lower energies. This will, for example, allow scientists to better understand the flow of hot gas within clusters of galaxies and to track the movement of different elements in the debris of supernova explosions.
Resolve is taking astronomers into a new era of cosmic exploration — and with only three-dozen pixels.
XRISM is a collaborative mission between JAXA and NASA, with contributions from over 70 institutions in Japan, the U.S., Canada, and Europe. NASA Goddard developed the Resolve detector and many of the instrument subsystems, together with the two X-ray Mirror Assemblies. Goddard is also responsible for the Science Data Center, which developed analysis software and the data processing pipeline, as well as support for the XRISM General Observer Program.
Download high-resolution video and images from NASA’s Scientific Visualization Studio
By Francis Reddy
NASA’s Goddard Space Flight Center, Greenbelt, Md.
Media Contact:
Claire Andreoli
301-286-1940
claire.andreoli@nasa.gov
NASA’s Goddard Space Flight Center, Greenbelt, Md.
Article
1 hour ago
4 min read Webb Captures Top of Iconic Horsehead Nebula in Unprecedented Detail
Article
1 day ago
2 min read NASA’s Hubble Pauses Science Due to Gyro Issue
Article
4 days ago
Keep Exploring Discover More Topics From NASA
Missions
Humans in Space
Climate Change
Solar System
International Space Station Program Manager Dana Weigel
“When people begin their careers, they start as an individual contributor. You’re a technical expert; your worth and your value are based on what you know and what you can do as an individual.
“Then there’s an interesting journey that you have to take from an individual contributor to a leader of people. I enjoy watching people go through this change and helping them make the transition. What you eventually realize is that your success as a leader is not really yours, it’s the team’s. You’re not successful without the team, so it’s your ability to support, motivate, and guide the team that allows us to accomplish amazing things.
“It’s really important as a leader to keep this in mind. Certainly, leaders have opinions, but it’s your ability to give the team a voice and to get them working effectively as a team that makes us successful.”
— Dana Weigel, International Space Station Program Manager, NASA’s Johnson Space Center
Image Credit: NASA / Josh Valcarcel
Interviewer: NASA / Michelle Zajac
NASA’s Webb Maps Weather on Planet 280 Light-Years Away
NASA, ESA, CSA, Ralf Crawford (STScI)
An international team of researchers has successfully used NASA’s James Webb Space Telescope to map the weather on the hot gas-giant exoplanet WASP-43 b.
Precise brightness measurements over a broad spectrum of mid-infrared light, combined with 3D climate models and previous observations from other telescopes, suggest the presence of thick, high clouds covering the nightside, clear skies on the dayside, and equatorial winds upwards of 5,000 miles per hour mixing atmospheric gases around the planet.
The investigation is just the latest demonstration of the exoplanet science now possible with Webb’s extraordinary ability to measure temperature variations and detect atmospheric gases trillions of miles away.
Image: Hot Gas-Giant Exoplanet WASP-43 b (Artist’s Concept) This artist’s concept shows what the hot gas-giant exoplanet WASP-43 b could look like. WASP-43 b is a Jupiter-sized planet roughly 280 light-years away, in the constellation Sextans. The planet orbits its star at a distance of about 1.3 million miles, completing one circuit in about 19.5 hours. Because it is so close to its star, WASP-43 b is probably tidally locked: Its rotation rate and orbital period are the same, such that one side faces the star at all times. Credits: NASA, ESA, CSA, Ralf Crawford (STScI) Tidally Locked “Hot Jupiter”WASP-43 b is a “hot Jupiter” type of exoplanet: similar in size to Jupiter, made primarily of hydrogen and helium, and much hotter than any of the giant planets in our own solar system. Although its star is smaller and cooler than the Sun, WASP-43 b orbits at a distance of just 1.3 million miles – less than 1/25th the distance between Mercury and the Sun.
With such a tight orbit, the planet is tidally locked, with one side continuously illuminated and the other in permanent darkness. Although the nightside never receives any direct radiation from the star, strong eastward winds transport heat around from the dayside.
Since its discovery in 2011, WASP-43 b has been observed with numerous telescopes, including NASA’s Hubble and now-retired Spitzer space telescopes.
“With Hubble, we could clearly see that there is water vapor on the dayside. Both Hubble and Spitzer suggested there might be clouds on the nightside,” explained Taylor Bell, researcher from the Bay Area Environmental Research Institute and lead author of a study published today in Nature Astronomy. “But we needed more precise measurements from Webb to really begin mapping the temperature, cloud cover, winds, and more detailed atmospheric composition all the way around the planet.”
Mapping Temperature and Inferring WeatherAlthough WASP-43 b is too small, dim, and close to its star for a telescope to see directly, its short orbital period of just 19.5 hours makes it ideal for phase curve spectroscopy, a technique that involves measuring tiny changes in brightness of the star-planet system as the planet orbits the star.
Since the amount of mid-infrared light given off by an object depends largely on how hot it is, the brightness data captured by Webb can then be used to calculate the planet’s temperature.
Image: Hot Gas-Giant Exoplanet WASP-43 b (MIRI Phase Curve) This phase curve, captured by the MIRI low resolution spectrometer on NASA’s James Webb Space Telescope, shows the change in brightness of the WASP-43 system over time as the planet orbits its star. The system appears brightest when the hot dayside of the planet is facing the telescope, just before and after it passes behind the star. The system grows dimmer as the planet continues its orbits and the nightside rotates into view. It brightens again after passing in front of the star as the dayside rotates back into view. WASP-43 b is a hot Jupiter roughly 280 light-years away, in the constellation Sextans. Credits: Science: Taylor J. Bell (BAERI); Joanna Barstow (Open University); Michael Roman (University of Leicester) Graphic Design: NASA, ESA, CSA, Ralf Crawford (STScI)The team used Webb’s MIRI (Mid-Infrared Instrument) to measure light from the WASP-43 system every 10 seconds for more than 24 hours. “By observing over an entire orbit, we were able to calculate the temperature of different sides of the planet as they rotate into view,” explained Bell. “From that, we could construct a rough map of temperature across the planet.”
The measurements show that the dayside has an average temperature of nearly 2,300 degrees Fahrenheit (1,250 degrees Celsius) – hot enough to forge iron. Meanwhile, the nightside is significantly cooler at 1,100 degrees Fahrenheit (600 degrees Celsius). The data also helps locate the hottest spot on the planet (the “hotspot”), which is shifted slightly eastward from the point that receives the most stellar radiation, where the star is highest in the planet’s sky. This shift occurs because of supersonic winds, which move heated air eastward.
“The fact that we can map temperature in this way is a real testament to Webb’s sensitivity and stability,” said Michael Roman, a co-author from the University of Leicester in the U.K.
To interpret the map, the team used complex 3D atmospheric models like those used to understand weather and climate on Earth. The analysis shows that the nightside is probably covered in a thick, high layer of clouds that prevent some of the infrared light from escaping to space. As a result, the nightside – while very hot – looks dimmer and cooler than it would if there were no clouds.
Image: Hot Gas-Giant Exoplanet WASP-43 b (Temperature Maps) This set of maps shows the temperature of the visible side of the hot gas-giant exoplanet WASP-43 b, as it orbits its star. The dayside of the planet is visible just before and after it passes behind the star. The temperatures were calculated based on more than 8,000 brightness measurements of 5- to 12-micron mid-infrared light detected from the star-planet system by MIRI (the Mid-Infrared Instrument) on NASA’s James Webb Space Telescope. In general, the hotter an object is, the more mid-infrared light it gives off. Credits: Science: Taylor J. Bell (BAERI); Joanna Barstow (Open University); Michael Roman (University of Leicester) Graphic Design: NASA, ESA, CSA, Ralf Crawford (STScI) Animation: Hot Gas-Giant Exoplanet WASP-43 b (Temperature Maps)To view this video please enable JavaScript, and consider upgrading to a web browser that
supports HTML5 video
Although the planet is far too close to the blinding light of its star to see on its own, it is possible to calculate its brightness by measuring the brightness of the star-planet system as a whole, and then subtracting the amount of light coming from the star (measured when the planet is behind the star).
Webb was able to measure each side of the planet by observing over an entire 19.5-hour orbit. The planet is tidally locked, which means that its rotation rate is the same as its orbital period, so different sides rotate into view as the planet moves around the star.
WASP-43 b has an average temperature of about 2,280°F (1,250°C) on the dayside and 1,115°F (600°C) on the nightside. The temperature map also shows that the nightside is probably covered in thick, high clouds. Clouds prevent some of the infrared energy from escaping to space, making the nightside appear cooler than it would if there were no clouds. Thomas Muller, MPIA Missing Methane and High Winds
The broad spectrum of mid-infrared light captured by Webb also made it possible to measure the amount of water vapor (H2O) and methane (CH4) around the planet. “Webb has given us an opportunity to figure out exactly which molecules we’re seeing and put some limits on the abundances,” said Joanna Barstow, a co-author from the Open University in the U.K.
The spectra show clear signs of water vapor on the nightside as well as the dayside of the planet, providing additional information about how thick the clouds are and how high they extend in the atmosphere.
Surprisingly, the data also shows a distinct lack of methane anywhere in the atmosphere. Although the dayside is too hot for methane to exist (most of the carbon should be in the form of carbon monoxide), methane should be stable and detectable on the cooler nightside.
“The fact that we don’t see methane tells us that WASP-43b must have wind speeds reaching something like 5,000 miles per hour,” explained Barstow. “If winds move gas around from the dayside to the nightside and back again fast enough, there isn’t enough time for the expected chemical reactions to produce detectable amounts of methane on the nightside.”
The team thinks that because of this wind-driven mixing, the atmospheric chemistry is the same all the way around the planet, which wasn’t apparent from past work with Hubble and Spitzer.
The MIRI observation of WASP-43 b was conducted as part of the Webb Early Release Science programs, which are providing researchers with a vast set of robust, open-access data for studying a wide array of cosmic phenomena.The James Webb Space Telescope is the world’s premier space science observatory. Webb is solving mysteries in our solar system, looking beyond to distant worlds around other stars, and probing the mysterious structures and origins of our universe and our place in it. Webb is an international program led by NASA with its partners, ESA (European Space Agency) and the Canadian Space Agency.
DownloadsRight click the images in this article to open a larger version in a new tab/window.
Download full resolution images for this article from the Space Telescope Science Institute.
The research results can be viewed here. They were published today in the Nature Astronomy.
Laura Betz – laura.e.betz@nasa.gov, Rob Gutro – rob.gutro@nasa.gov
NASA’s Goddard Space Flight Center, Greenbelt, Md.
Margaret Carruthers mcarruthers@stsci.edu, Christine Pulliam – cpulliam@stsci.edu
Space Telescope Science Institute, Baltimore, Md.
More Webb News – https://science.nasa.gov/mission/webb/latestnews/
More Webb Images – https://science.nasa.gov/mission/webb/multimedia/images/
Webb Mission Page – https://science.nasa.gov/mission/webb/
Related For Kids En EspañolPara Niños : Qué es una exoplaneta?
Keep Exploring Related Topics James Webb Space TelescopeWebb is the premier observatory of the next decade, serving thousands of astronomers worldwide. It studies every phase in the…
Exoplanets
Stars
Universe
Share Details Last Updated Apr 30, 2024 Editor Stephen Sabia Contact Laura Betz laura.e.betz@nasa.gov Related Terms
NASA Challenge Gives Space Thruster Commercial Boost
3 min read
Preparations for Next Moonwalk Simulations Underway (and Underwater) Members of Team Miles with the CubeSat developed during the NASA Cube Quest Challenge. From left to right: Alex Wingeier, Don Smith, Wes Faler.Image credit: Team MilesIn its pursuit to develop groundbreaking technologies to explore space and benefit life on Earth, NASA invites the public to contribute ideas to the agency through participatory opportunities, including challenges. The Cube Quest competition – NASA’s first in-space challenge – kicked off in 2015, offering a total prize purse of $5 million.
This challenge asked university and private developer teams to complete objectives in designing, building, and delivering small satellites capable of advanced deep space operations. Throughout two challenge phases, several teams developed and tested technologies to launch small satellites, also known as CubeSats, into orbit.
Team Miles of Tampa, Florida, was the sole team to send its CubeSat aboard 2022’s Artemis I flight test around the Moon. Team Miles was under the leadership of Wesley Faler and found members through Tampa Hackerspace, a community nonprofit workshop. From there, it grew to include software engineering, information technology, radio-frequency engineering, radiation, aerospace engineering, graphic design, and blacksmithing experts.
“I was prototyping a plasma thruster design in my second bedroom workshop,” says Faler. “NASA’s challenge was specifically looking for wild ideas from citizen scientists – not your traditional degree or institution scientists – and that appealed to me.”
Photo collage: Team Miles integrates their CubeSat into a dispenser for the Orion stage adapter. The Orion stage adapter connects the SLS rocket to Orion and had slots built into it for the payloads.Credits: NASA/KSCDuring the challenge’s ground test phases, Team Miles developed its Miles CubeSat, a breadbox-sized satellite propelled with a novel water-fueled plasma thruster. The team also created and radiation-tested its Resilient Affordable CubeSat Processor flight computer to communicate in deep space.
In total, NASA awarded $100,000 to Team Miles in the ground phase of the Cube Quest challenge. Despite not winning the in-space phase of the challenge due to a communications failure after launch, Faler emphasizes the value of participation extending beyond monetary awards, showcasing the team’s resilience and determination.
“The challenge generated publicity and public awareness for a wild idea. The fact that NASA looked at the idea and helped us advance it gave us a platform to talk to people. That is huge for these challenges – the opportunity to be heard,” says Faler.
Since the challenge ended, Faler has cofounded and become the CEO of Miles Space, Inc., a company that was born out of the innovative spirit of Team Miles. In January 2024, Miles Space was acquired by RocketStar, Inc., where Faler now serves as chief technology officer. Stemming from iterations of Faler’s original thruster, the company has developed a nuclear fusion propulsion system, a testament to the profound impact of the Cube Quest competition on commercial space technology.
As for words of wisdom for future challenge participants, Faler said, “Whether you place in the challenge or not, you haven’t lost time by participating. Being part of that process forces you to grow.”
Gateway: Forward Progress on Artemis IV
The Artemis IV mission is taking shape with major hardware for Gateway, humanity’s first space station to orbit the Moon, progressing in Turin, Italy.
NASA will launch HALO (Habitation and Logistics Outpost), center of image in background, along with the Power and Propulsion Element (not pictured) to lunar orbit ahead of the Artemis IV mission as the first elements of Gateway, the first space station to be assembled around the Moon. During that mission, astronauts will launch in the Orion spacecraft with the Lunar I-Hab, pieces of which are shown here in the foreground, and deliver it to Gateway. Lunar I-Hab is provided by ESA (European Space Agency) with significant hardware contributions from JAXA (Japan Aerospace Exploration Agency), and is one of four Gateway modules that astronauts will live and work inside as they orbit the Moon.
Thales Alenia Space completed major welding on HALO and began initial fabrication of Lunar I-Hab last year. The company is a subcontractor to Northrop Grumman for HALO, and prime contractor to ESA for Lunar I-Hab.
Along with HALO, I-Hab, and the Power and Propulsion Element, two additional Gateway modules provided by ESA and the Mohammad Bin Rashid Space Centre make up the core components of the space station. CSA (Canadian Space Agency) is providing the Canadarm3 advanced external robotic system and fixtures for science instruments.
The international teams of astronauts living, conducting science, and preparing for missions to the lunar South Pole region from Gateway will be the first humans to make their home in deep space.
Gateway’s Lunar I-Hab module under construction at a Thales Alenia Space industrial plant in Turin, Italy. ESA/Stephane Corvaja Gateway’s Lunar I-Hab module under construction at a Thales Alenia Space industrial plant in Turin, Italy. ESA/Stephane CorvajaNASA Marshall Prepares for Strategic Facilities Updates
4 min read
Preparations for Next Moonwalk Simulations Underway (and Underwater)NASA’s Marshall Space Flight Center is getting ready for the next big step in the evolution of its main campus in Huntsville, Alabama. Through a series of multi-year infrastructure projects, Marshall is optimizing its footprint to assure its place as a vibrant and vital hub for the aerospace community in the next era.
Near-term plans call for the carefully orchestrated take-down of 19 obsolete and idle structures – among them the 363-foot-tall Dynamic Test Stand, the Propulsion and Structural Test Facility, and Neutral Buoyancy Simulator. These facilities are not required for current or future missions, and the demolitions will help the center transition to a more modern, sustainable, and affordable infrastructure.
Test engineers fire up the Saturn I rocket’s first stage (S-1-10) at the Propulsion and Structural Test Facility, or “T-tower,” at NASA’s Marshall Space Flight Center in 1964.NASA“These facilities helped NASA make history – the Dynamic Test Stand was the tallest manmade structure in North Alabama and helped us test both the Saturn V rocket and the space shuttle,” said Joseph Pelfrey, Marshall’s Center Director. “Without these structures, we wouldn’t have the space program we have today. While it is hard to let them go, the most important legacy remaining are the people that built and stewarded these facilities and the missions they enabled. That same bold spirit fuels us, today. We are committed to carrying it forward to inspire the workforce of tomorrow.”
Built in 1964, the Dynamic Test Stand initially was used to test fully assembled Saturn V rockets. In 1978, engineers there also integrated all space shuttle elements for the first time, including the orbiter, external fuel tank, and solid rocket boosters.
The Propulsion and Structural Test Facility – better known at Marshall as the “T-tower” due to its unique shape – was built in 1957 by the U.S. Army Ballistic Missile Agency and transferred to NASA when Marshall was founded in 1960. There, engineers tested components of the Saturn launch vehicles, the Army’s Redstone Rocket, and shuttle solid rocket boosters.
The Neutral Buoyancy Simulator, including its 1.3-million-gallon tank and control room, was built in the late 1960s. From 1969 until its closing in 1997, the facility enabled NASA astronauts and researchers to experience near-weightlessness, conducting underwater testing of space hardware and practice runs for servicing the Hubble Space Telescope. It was replaced in 1997 by a new facility at NASA’s Johnson Space Center in Houston.
Astronauts conduct underwater testing on the International Space Station’s power module in the Neutral Buoyancy Simulator at NASA’s Marshall Space Flight Center in 1995.NASA Honoring the Past, Building the FutureMarshall master planner Justin Taylor said the facilities team looked at every possibility for refurbishing the old sites.
“The upkeep of aging facilities is costly, and we have to put our funding where it does the most good for NASA’s mission,” he said. “These are tough choices, but we have to prioritize function and cost over nostalgia. We’re making way for what’s next.”
To preserve NASA history, the agency has worked with architectural historians over the years on detailed drawings, written histories, and large-format photographs of the sites. Those documents are part of the Library of Congress’s permanent Historic American Engineering Record collection, making their history and accomplishments available to the public for generations to come.
Marshall facilities engineers are still finalizing the details and timeline for the demolitions. Work is expected to begin in late 2024 and end in late 2025. Additionally, to support the center’s employees and all the mission work they are doing, Marshall has a few infrastructure projects in design stages that will include the construction of two state-of-the-art buildings within the decade ahead.
A new Marshall Exploration Facility will offer a two to three story facility at approximately 55,000 square feet located within the 4200 complex. The facility will include an auditorium, along with conferencing, training, retail, and administrative spaces. The new Engineering Science Lab – at approximately 140,000 square feet – will provide a modern, flexible laboratory environment to accommodate a new focus for research and testing capabilities.
Ultimately, NASA’s vision for Marshall is a dynamic, interconnected campus. The center’s master plan features a central greenway connecting its two most densely populated zones – its administrative complex and engineering complex.
“As we look towards the aspirational goals we have as an agency, Marshall’s contributions may look different than our past but be no less important,” said Pelfrey. “And we want our partners, employees, and the community to be part of the evolution with us, bringing complementary skills and capabilities, innovative ideas, and a passion for exploration and discovery.”
To learn more about NASA’s Marshall Space Flight Center, visit:
Molly Porter
Marshall Space Flight Center, Huntsville, Ala.
256-544-0034
molly.a.porter@nasa.gov
Missions
Humans in Space
Climate Change
Solar System
NASA Sets Coverage for Boeing Starliner’s First Crewed Launch, Docking
NASA will provide live coverage of prelaunch and launch activities for the agency’s Boeing Crew Flight Test, which will carry NASA astronauts Butch Wilmore and Suni Williams to and from the International Space Station.
Launch of the ULA (United Launch Alliance) Atlas V rocket and Boeing Starliner spacecraft is targeted for 10:34 p.m. EDT Monday, May 6, from Space Launch Complex-41 at Cape Canaveral Space Force Station in Florida.
The flight test will carry Wilmore and Williams to the space station for about a week to test the Starliner spacecraft and its subsystems before NASA certifies the transportation system for rotational missions to the orbiting laboratory for the agency’s Commercial Crew Program.
Starliner will dock to the forward-facing port of the station’s Harmony module at 12:48 a.m., Wednesday, May 8.
The deadline for media accreditation for in-person coverage of this launch has passed. The agency’s media credentialing policy is available online. For questions about media accreditation, please email: ksc-media-accreditat@mail.nasa.gov.
NASA’s mission coverage is as follows (all times Eastern and subject to change based on real-time operations):
Wednesday, May 1
1:30 p.m. – Virtual news conference at Kennedy with the flight test astronauts:
- NASA astronaut Butch Wilmore
- NASA astronaut Suni Williams
Coverage of the virtual news conference will stream live on NASA+, NASA Television, the NASA app, YouTube, and the agency’s website.
Media may ask questions via phone only. For the dial-in number and passcode, please contact the Kennedy newsroom no later than 12:30 p.m., Wednesday, May 1, at: ksc-newsroom@mail.nasa.gov.
Friday, May 3
12:30 p.m. – Prelaunch news conference at Kennedy (no earlier than one hour after completion of the Launch Readiness Review) with the following participants:
- NASA Administrator Bill Nelson
- Steve Stich, manager, NASA’s Commercial Crew Program
- Dana Weigel, manager, NASA’s International Space Station Program
- Emily Nelson, chief flight director, NASA
- Jennifer Buchli, chief scientist, NASA’s International Space Station Program
- Mark Nappi, vice president and program manager, Commercial Crew Program, Boeing
- Gary Wentz, vice president, Government and Commercial Programs, ULA
- Brian Cizek, launch weather officer, 45th Weather Squadron, Cape Canaveral Space Force Station
Coverage of the prelaunch news conference will stream live on NASA+, NASA Television, the NASA app, YouTube, and the agency’s website.
Media may ask questions in person and via phone. Limited auditorium space will be available for in-person participation. For the dial-in number and passcode, media should contact the Kennedy newsroom no later than 11:30 a.m., Friday, May 3, at ksc-newsroom@mail.nasa.gov.
3:30 p.m. – NASA Social panel live stream event at Kennedy with the following participants:
- Ian Kappes, deputy launch vehicle office manager, NASA’s Commercial Crew Program
- Amy Comeau Denker, Starliner associate chief engineer, Boeing
- Caleb Weiss, system engineering and test leader, ULA
- Jennifer Buchli, chief scientist, NASA’s International Space Station Program
Coverage of the panel live stream event will stream live at @NASAKennedy on YouTube, @NASAKennedy on X, and @NASAKennedy on Facebook. Members of the public may ask questions online by posting questions to the YouTube, X, and Facebook livestreams using #AskNASA.
Monday, May 6
6:30 p.m. – Launch coverage begins on NASA+, NASA Television, the NASA app, YouTube, and the agency’s website.
10:34 p.m. – Launch
Launch coverage on NASA+ will end shortly after Starliner orbital insertion. NASA Television will provide continuous coverage leading up to docking and through hatch opening and welcome remarks.
Tuesday, May 7
12 a.m. – Postlaunch news conference with the following participants:
- NASA Deputy Administrator Pam Melroy
- Ken Bowersox, associate administrator, NASA’s Space Operations Mission Directorate
- Steve Stich, manager, NASA’s Commercial Crew Program
- Dana Weigel, manager, NASA’s International Space Station Program
- Mark Nappi, vice president and program manager, Commercial Crew Program, Boeing
- Gary Wentz, vice president, Government and Commercial Programs, ULA
Coverage of the postlaunch news conference will air live on NASA+, NASA Television, the NASA app, YouTube, and the agency’s website.
NASA+ will resume coverage and NASA Television’s media channel will break from in-orbit coverage to carry the postlaunch news conference. Mission operational coverage will continue on NASA Television’s public channel and the agency’s website. Once the postlaunch news conference is complete, NASA+ coverage will end, and mission coverage will continue on both NASA channels.
Media may ask questions in person and via phone. Limited auditorium space will be available for in-person participation. For the dial-in number and passcode, media should contact the Kennedy newsroom no later than 10:30 p.m., Monday, May 6, at ksc-newsroom@mail.nasa.gov.
10:15 p.m. – Arrival coverage resumes on NASA+, the NASA app, and YouTube, and continues on NASA Television and the agency’s website.
Wednesday, May 8
12:48 a.m. – Targeted docking to the forward-facing port of the station’s Harmony module
2:35 a.m. – Hatch opening
3:15 a.m. – Welcome remarks
4:15 a.m. – Post-docking news conference at Johnson with the following participants:
- NASA Associate Administrator Jim Free
- Steve Stich, manager, NASA’s Commercial Crew Program
- Dana Weigel, manager, NASA’s International Space Station Program
- Mark Nappi, vice president and program manager, Commercial Crew Program, Boeing
Coverage of the post-docking news conference will air live on NASA+, NASA Television, the NASA app, YouTube, and the agency’s website.
All times are estimates and could be adjusted based on operations after launch. Follow the space station blog for the most up-to-date operations information.
Audio Only Coverage
Audio only of the news conferences and launch coverage will be carried on the NASA “V” circuits, which may be accessed by dialing 321-867-1220, -1240 or -7135. On launch day, “mission audio,” countdown activities without NASA Television launch commentary, will be carried on 321-867-7135.
Launch audio also will be available on Launch Information Service and Amateur Television System’s VHF radio frequency 146.940 MHz and KSC Amateur Radio Club’s UHF radio frequency 444.925 MHz, FM mode, heard within Brevard County on the Space Coast.
Live Video Coverage Prior to Launch
NASA will provide a live video feed of Space Launch Complex-41 approximately 48 hours prior to the planned liftoff of the mission. Pending unlikely technical issues, the feed will be uninterrupted until the prelaunch broadcast begins on NASA Television, approximately four hours prior to launch. Once the feed is live, find it here: http://youtube.com/kscnewsroom.
NASA Website Launch Coverage
Launch day coverage of the mission will be available on the agency’s website. Coverage will include live streaming and blog updates beginning no earlier than 6:30 p.m., May 6 as the countdown milestones occur. On-demand streaming video and photos of the launch will be available shortly after liftoff.
For questions about countdown coverage, contact the Kennedy newsroom at 321-867-2468. Follow countdown coverage on the commercial crew or the Crew Flight Test blog.
Attend the Launch Virtually
Members of the public can register to attend this launch virtually. NASA’s virtual guest program for this mission also includes curated launch resources, notifications about related opportunities or changes, and a stamp for the NASA virtual guest passport following launch.
Watch and Engage on Social Media
Let people know you’re following the mission on X, Facebook, and Instagram by using the hashtags #Starliner and #NASASocial. You can also stay connected by following and tagging these accounts:
X: @NASA, @NASAKennedy, @NASASocial, @Space_Station, @ISS_Research, @ISS National Lab, @BoeingSpace, @Commercial_Crew
Facebook: NASA, NASAKennedy, ISS, ISS National Lab
Instagram: @NASA, @NASAKennedy, @ISS, @ISSNationalLab
Coverage en Espanol
Did you know NASA has a Spanish section called NASA en Espanol? Check out NASA en Espanol on X, Instagram, Facebook, and YouTube for additional mission coverage.
Para obtener información sobre cobertura en español en el Centro Espacial Kennedy o si desea solicitar entrevistas en español, comuníquese con Antonia Jaramillo: 321-501-8425; antonia.jaramillobotero@nasa.gov; o Messod Bendayan: 256-930-1371; messod.c.bendayan@nasa.gov.
NASA’s Commercial Crew Program has delivered on its goal of safe, reliable, and cost-effective transportation to and from the International Space Station from the United States through a partnership with American private industry. This partnership is changing the arc of human spaceflight history by opening access to low-Earth orbit and the International Space Station to more people, science, and commercial opportunities. The space station remains the springboard to NASA’s next great leap in space exploration, including future missions to the Moon and, eventually, to Mars.
For NASA’s launch blog and more information about the mission, visit:
https://www.nasa.gov/commercialcrew
-end-
Joshua Finch / Claire O’Shea
Headquarters, Washington
202-358-1100
joshua.a.finch@nasa.gov / claire.a.o’shea@nasa.gov
Steven Siceloff / Danielle Sempsrott / Stephanie Plucinsky
Kennedy Space Center, Florida
321-867-2468
steven.p.siceloff@nasa.gov / danielle.c.sempsrott@nasa.gov / stephanie.n.plucinsky@nasa.gov
Leah Cheshier
Johnson Space Center, Houston
281-483-5111
leah.d.cheshier@nasa.gov
The Horse’s Mane
The Horse’s Mane
This image of part of the Horsehead Nebula, captured by NASA’s James Webb Space Telescope and released on April 29, 2024, shows the nebula in a whole new light, capturing the region’s complexity with unprecedented spatial resolution. Located roughly 1,300 light-years away, the nebula formed from a collapsing interstellar cloud of material, and glows because it is illuminated by a nearby hot star. The gas clouds surrounding the Horsehead have already dissipated, but the jutting pillar is made of thick clumps of material and therefore is harder to erode. Astronomers estimate that the Horsehead has about 5 million years left before it too disintegrates.
Image Credit: NASA, ESA, CSA, K. Misselt (University of Arizona) and A. Abergel (IAS/University Paris-Saclay, CNRS)
NASA Sets Coverage for Dragon Spacecraft Relocation on Space Station
In preparation for the arrival of NASA’s Boeing Crew Flight Test, four crew members aboard the International Space Station will relocate the SpaceX Dragon crew spacecraft to a different docking port Thursday, May 2, to make way for Boeing’s Starliner spacecraft.
NASA will provide live coverage of the move beginning at 7:30 a.m. EDT on NASA+, NASA Television, the NASA app, YouTube, and the agency’s website. Learn how to stream NASA TV through a variety of platforms including social media.
NASA astronauts Matt Dominick, Mike Barratt, and Jeanette Epps, as well as Roscosmos cosmonaut Alexander Grebenkin, will undock from the forward-facing port of the station’s Harmony module at 7:45 a.m. The spacecraft will then autonomously dock with the module’s space-facing port at 8:28 a.m.
The relocation, supported by flight controllers at NASA’s Johnson Space Center in Houston and SpaceX in Hawthorne, California, will free up Harmony’s forward-facing port for the docking of the Boeing Starliner spacecraft for its first flight with astronauts in May. Starliner will autonomously dock to the forward-facing port of the Harmony module, delivering NASA astronauts Butch Wilmore and Suni Williams to the space station.
This will be the fourth port relocation of a Dragon spacecraft with crew, following previous relocations during the Crew-1, Crew-2, and Crew-6 missions.
NASA’s SpaceX Crew-8 mission launched March 3 from NASA’s Kennedy Space Center in Florida and docked to the space station March 5. Crew-8, targeted to return this fall, is the eighth rotational crew mission from NASA and SpaceX as a part of the agency’s Commercial Crew Program.
Learn more about space station activities by following @space_station and @ISS_Research on X, as well as the ISS Facebook, ISS Instagram, and the space station blog.
-end-
Joshua Finch / Claire O’Shea
Headquarters, Washington
202-358-1100
joshua.a.finch@nasa.gov / claire.a.o’shea@nasa.gov
Sandra Jones / Anna Schneider
Johnson Space Center, Houston
281-483-5111
sandra.p.jones@nasa.gov / anna.c.schneider@nasa.gov
NASA Scientists Gear Up for Solar Storms at Mars
The Sun will be at peak activity this year, providing a rare opportunity to study how solar storms and radiation could affect future astronauts on the Red Planet.
In the months ahead, two of NASA’s Mars spacecraft will have an unprecedented opportunity to study how solar flares — giant explosions on the Sun’s surface — could affect robots and future astronauts on the Red Planet.
That’s because the Sun is entering a period of peak activity called solar maximum, something that occurs roughly every 11 years. During solar maximum, the Sun is especially prone to throwing fiery tantrums in a variety of forms — including solar flares and coronal mass ejections — that launch radiation deep into space. When a series of these solar events erupts, it’s called a solar storm.
Earth’s magnetic field largely shields our home planet from the effects of these storms. But Mars lost its global magnetic field long ago, leaving the Red Planet more vulnerable to the Sun’s energetic particles. Just how intense does solar activity get on Mars? Researchers hope the current solar maximum will give them a chance to find out. Before sending humans there, space agencies need to determine, among many other details, what kind of radiation protection astronauts would require.
Learn how NASA’s MAVEN and the agency’s Curiosity rover will study solar flares and radiation at Mars during solar maximum – a period when the Sun is at peak activity. Credit: NASA/JPL-Caltech/GSFC/SDO/MSSS/University of Colorado“For humans and assets on the Martian surface, we don’t have a solid handle on what the effect is from radiation during solar activity,” said Shannon Curry of the University of Colorado Boulder’s Laboratory for Atmospheric and Space Physics. Curry is principal investigator for NASA’s MAVEN (Mars Atmosphere and Volatile EvolutioN) orbiter, which is managed by NASA’s Goddard Space Flight Center in Greenbelt, Maryland. “I’d actually love to see the ‘big one’ at Mars this year — a large event that we can study to understand solar radiation better before astronauts go to Mars.”
Measuring High and LowMAVEN observes radiation, solar particles, and more from high above Mars. The planet’s thin atmosphere can affect the intensity of the particles by the time they reach the surface, which is where NASA’s Curiosity rover comes in. Data from Curiosity’s Radiation Assessment Detector, or RAD, has helped scientists understand how radiation breaks down carbon-based molecules on the surface, a process that could affect whether signs of ancient microbial life are preserved there. The instrument has also provided NASA with an idea of how much shielding from radiation astronauts could expect by using caves, lava tubes, or cliff faces for protection.
When a solar event occurs, scientists look both at the quantity of solar particles and how energetic they are.
“You can have a million particles with low energy or 10 particles with extremely high energy,” said RAD’s principal investigator, Don Hassler of the Boulder, Colorado, office of the Southwest Research Institute. “While MAVEN’s instruments are more sensitive to lower-energy ones, RAD is the only instrument capable of seeing the high-energy ones that make it through the atmosphere to the surface, where astronauts would be.”
The Radiation Assessment Detector on NASA’s Curiosity is indicated in this annotated image from the rover’s Mastcam. RAD scientists are excited to use the instrument to study radiation on the Martian surface during solar maximum.NASA/JPL-Caltech/MSSS This artist’s concept depicts NASA’s Mars Atmosphere and Volatile EvolutioN (MAVEN) near Mars. The spacecraft observes radiation, solar particles, and more from high above the Red Planet.NASA/GFSCWhen MAVEN detects a big solar flare, the orbiter’s team lets the Curiosity team know so they can watch for changes in RAD’s data. The two missions can even assemble a time series measuring changes down to the half-second as particles arrive at the Martian atmosphere, interact with it, and eventually strike the surface.
The MAVEN mission also leads an early warning system that lets other Mars spacecraft teams know when radiation levels begin to rise. The heads-up enables missions to turn off instruments that could be vulnerable to solar flares, which can interfere with electronics and radio communication.
Lost WaterBeyond helping to keep astronauts and spacecraft safe, studying solar maximum could also lend insight into why Mars changed from being a warm, wet Earth-like world billions of years ago to the freezing desert it is today.
The planet is at a point in its orbit when it’s closest to the Sun, which heats up the atmosphere. That can cause billowing dust storms to blanket the surface. Sometimes the storms merge, becoming global.
While there’s little water left on Mars — mostly ice under the surface and at the poles — some still circulates as vapor in the atmosphere. Scientists wonder whether global dust storms help to eject this water vapor, lofting it high above the planet, where the atmosphere gets stripped away during solar storms. One theory is that this process, repeated enough times over eons, might explain how Mars went from having lakes and rivers to virtually no water today.
If a global dust storm were to occur at the same time as a solar storm, it would provide an opportunity to test that theory. Scientists are especially excited because this particular solar maximum is occurring at the start of the dustiest season on Mars, but they also know that a global dust storm is a rare occurrence.
More About the MissionsNASA’s Goddard Space Flight Center in Greenbelt, Maryland, manages the MAVEN mission. Lockheed Martin Space built the spacecraft and is responsible for mission operations. JPL provides navigation and Deep Space Network support. The Laboratory for Atmospheric and Space Physics at the University of Colorado Boulder is responsible for managing science operations and public outreach and communications.
Curiosity was built by NASA’s Jet Propulsion Laboratory, which is managed by Caltech in Pasadena, California. JPL leads the mission on behalf of NASA’s Science Mission Directorate in Washington. The RAD investigation is supported by NASA’s Heliophysics Division as part of NASA’s Heliophysics System Observatory (HSO).
Additional information about the missions can be found at:
and
News Media ContactsNancy Neal Jones
Goddard Space Flight Center, Greenbelt, Md.
301-286-0039
nancy.n.jones@nasa.gov
Andrew Good
Jet Propulsion Laboratory, Pasadena, Calif.
818-393-2433
andrew.c.good@jpl.nasa.gov
Karen Fox / Charles Blue
NASA Headquarters, Washington
301-286-6284 / 202-802-5345
karen.c.fox@nasa.gov / charles.e.blue@nasa.gov
2024-052
Share Details Last Updated Apr 29, 2024 Related Terms Explore More 1 min read Major Martian MilestonesThere’s good news from NASA’s Cloudspotting on Mars project! That’s the project that invites you to…
Article 4 hours ago 2 min read NASA’s Hubble Pauses Science Due to Gyro IssueNASA is working to resume science operations of the agency’s Hubble Space Telescope after it…
Article 3 days ago 4 min read NASA’s ORCA, AirHARP Projects Paved Way for PACE to Reach Space Article 3 days agoNASA Administrator Names New Stennis Space Center Director
NASA Administrator Bill Nelson on Monday named John Bailey as director of the agency’s Stennis Space Center near Bay St. Louis, Mississippi, effective immediately. Bailey had been serving as acting director since January.
“John will build on his nearly 35 years of federal service to lead our talented workforce at Stennis,” said Nelson. “So much of NASA runs through Stennis. It is where we hone new and exciting capabilities in aerospace, technology, and deep space exploration. I am confident that John will lead the nation’s largest and premier propulsion test site to even greater success.”
NASA Stennis also is a unique federal city, home to more than 50 resident tenants with a combined workforce of over 5,200. The center tested the SLS (Space Launch System) core stage that helped launch the Artemis I mission. It also is testing all RS-25 engines to help power SLS launches and will conduct flightworthy testing of the agency’s new exploration upper stage prior to its use in space on future Artemis missions to the Moon and beyond.
The center is a leader in partnering and working with commercial aerospace companies to support their propulsion test projects. It also is expanding as an aerospace and technology hub, and in development of intelligent and autonomous systems needed for deep space exploration.
“This is an exciting time for NASA Stennis, and I am deeply honored to lead its great family of employees who make up this amazing workforce,” Bailey said. “We are dedicated to continuing to provide frontline support to the agency’s missions and initiatives. I look forward to our shared future and success.”
Bailey has more than three decades of federal service with the U.S. Air Force and NASA. As a communications engineer with the U.S. Air Force, Bailey led electronic communications testing worldwide. He joined the NASA Stennis team in 1999 and subsequently served in a variety of roles, managing and leading technical and non-technical organizations and supervising employees with a wide range of skills and backgrounds.
Bailey was tapped in 2015 to lead the NASA Stennis Engineering and Test Directorate, managing critical rocket propulsion test assets exceeding $2 billion in value and projects more than $221 million. He was named NASA Stennis associate director in 2018 and selected as the center’s deputy director in 2021.
An Alabama native, Bailey holds a bachelor’s degree in Electrical Engineering and a master’s degree in Business Administration from the University of South Alabama.
Access Bailey’s online biography at:
https://www.nasa.gov/people/john-w-bailey-jr/
-end-
Cheryl Warner
Headquarters, Washington
202-358-1600
cheryl.m.warner@nasa.gov
C. Lacy Thompson
Stennis Space Center, Bay St. Louis, Miss.
228-363-5499
calvin.l.thompson@nasa.gov
Major Martian Milestones
There’s good news from NASA’s Cloudspotting on Mars project! That’s the project that invites you to help identify exotic clouds high in the Martian atmosphere.
- Thanks to your help, the Cloudspotting on Mars project reached ahuge milestone. Another full Mars year, Mars Year 30 (Oct 2009 – Sep 2011), has been completed! That’s the second full Mars year of observations that has been analyzed since the project began.
- The team has uploaded another full year of data, Mars Year 31 (Sep 2011 – Aug 2013). You’ll find right here, ready for you to investigate.
- A new project from the Cloudspotting on Mars team has started its beta testing phase! In this new project, you’ll pick out cloud shapes in data from NASA’s Mars Atmosphere and Volatile Evolution (MAVEN) Mission. If you’re willing to help beta test this project and provide feedback before it launches, please send an email to the team. We’ll let everyone know when this project officially launches, of course!
Congratulations to the Cloudspotting on Mars team and all the volunteers who have helped spot Martian clouds!
Facebook logo @DoNASAScience @DoNASAScience Share Details Last Updated Apr 29, 2024 Related Terms Explore More 6 min read Pushing the Limits of Sub-Kilowatt Electric Propulsion Technology to Enable Planetary Exploration and Commercial Mission Concepts Article 6 days ago 5 min read Why is Methane Seeping on Mars? NASA Scientists Have New Ideas Article 1 week ago 5 min read Hubble Goes Hunting for Small Main Belt Asteroids Article 2 weeks agoInnovation that Impacts All NASA Missions: Improving How We Engineer Our Systems
Download PDF: Innovation that Impacts All NASA Missions: Improving How We Engineer Our Systems
John F. Kennedy set the tone for NASA’s culture in 1961 during his famous speech on going to the Moon, “We choose to go to the Moon not because it’s easy, but because it’s hard; because that goal will serve to organize and measure the best of our energies and skills, because that challenge is one that we are willing to accept, one we are unwilling to postpone…”
That culture has never faded, even across NASA’s diverse spectrum of missions. The continuous challenge to do what is hard or near impossible includes the requirement for innovation. Innovation is the importance of what we do, but also how we do it. With a goal of improving the way NASA’s workforce engineers its systems, the Systems Engineering (SE) Technical Discipline Team (TDT) has partnered with numerous facets of the NASA workforce to better enable innovation in how we work. Over the past year, three diverse teams made progress toward that goal by looking at the way we levy technical standards, improving understanding and integrated risk (cost, schedule, and technical), reducing project risk by better management of mass growth, and moving SE into the model based digital domain. A brief summary of each team’s efforts follows.
a). MBSE is being applied to help architect the ExMC, which is pushing the boundary of space medical systems to care for future astronauts. b). A proposed Mars sample return mission development project would benefit from using the NASA-endorsed ANSI/AIAA standard: Mass Properties Control for Space Systems
ExMC: Systems Analysis and Integration Using MBSE
Via its Model-Based Systems Engineering (MBSE) Infusion And Modernization Initiative (MIAMI), the NESC SE TDT partnered with the Human Research Program’s Exploration Medical Capability (ExMC) Element (https://www.nasa.gov/hrp/elements/exmc) at JSC. ExMC has adopted SE principles and tools (MBSE and the Systems Modeling Language) to develop an initial architecture and requirements for a future exploration medical system. MIAMI is assisting the ExMC work by providing an MBSE modeler who is matrixed to ExMC, one NASA MBSE Community of Practice (CoP) meeting per month dedicated to responding to ExMC’s needs, and any available/needed Agency MBSE infrastructure. In return, MIAMI is receiving modeling lessons learned, feedback to the MIAMI Leadership Team on available MBSE resources, and data needed to communicate MBSE successes and challenges to their SE TDT peers.The partnership has been mutually beneficial to ExMC, the SE TDT, and the greater NASA MBSE community. With MIAMI support, ExMC architected their system model, developed a model management plan, better defined their MBSE hiring and training needs, provided guidance to junior modelers, and developed ideas to push the boundaries of model usage.
As a return benefit, the MBSE community received a sample model architecture, an updated model management plan template, and valuable discussions at the MBSE CoP, where the ExMC presented ideas that had not been considered before. Ideas included the characteristics of good system modelers, how to manage model configuration, and using models with non-modeling tools. Notes from all these lively and well-attended CoP discussions are on the NASA Engineering Network MBSE website (https://nen.nasa.gov/web/mbse/). Beyond this, ExMC’s input on what will be necessary to grow NASA’s MBSE community and capability (e.g., modeler skillsets) continues to inform and ground in reality MIAMI’s recommendations to NASA’s Digital Transformation initiative.
For more information, contact Kerry McGuire, kerry.m.mcguire@nasa.gov.
NASA/JPL: Enterprise Approach to Mass Properties Control
In August 2019, a team of NESC and NASA subject matter experts (SME) issued a report regarding mass growth. It included recommendations to initiate the development and sustainment of an expanded mass growth database as an Agency resource and reforms in how programs and projects estimate, manage, and report mass properties based on the NASA-endorsed ANSI/AIAA S-120A-2015 [2019] standard, Mass Properties Control for Space Systems. The intent is to reap the benefits of a more common approach across NASA in managing and controlling mass growth and of using a common terminology among NASA Centers and its contractors. Historical mass growth data, consolidated in a single place, will help programs and projects in establishing Mass Growth Allowance (MGA) factors and mass margins above MGA that can reduce the risk of mass issues and potential cost overruns. To date, the NESC recommendations have resulted in major changes in mass management and control requirements and recommended best practices at JPL and other NASA Centers. Beyond Center-level actions, the NESC has engaged with the Office of the Chief Financial Officer to promote the use of the ANSI/AIAA standard’s terminology and calculations in future data collections for NPR 7120.5-mandated Cost Analysis Data Requirements documents.
For more information, contact Robert Shishko, robert.shishko@jpl.nasa.gov.
New approaches to streamlining design and constructions standards will benefit projects like the Gateway Power and Propulsion and Habitation and Logistics Outpost.HALO: Modernized Application of Design & Construction Standards
The NASA Technical Standards Process Improvement pilot activity initiated by the Habitation and Logistics Outpost (HALO) Project seeks to improve the way that NASA levies and manages technical standards by 1) moving from document-centric to data-centric (databases) management of the requirements; 2) incorporating important attributes into the database so that applicability, tailoring, and information management is streamlined; and 3) providing technical recommendations on acceptable approaches for compliance evidence. The effort is a fleet-leader on how to streamline the standards deployment, assessment, and long-term verification process, while also improving the allocation of resources based on mission risk.
NASA Technical Fellows participated in this review and provided important input and support for the assessment of Design and Construction (D&C) standards for the HALO project. The approach “shredded” the requirements documents into a database of individual requirements with fields to populate describing the requirement type and compliance approach. Overall, the pilot activity is an important first step in properly assessing and flowing D&C standards to NASA’s contractors and partners. NESC systems engineering and integration SMEs reviewed the HALO pilot deployment activity for managing and implementing design and construction standards. The SMEs identified advantages and disadvantages of the pilot activity and offered suggestions for improving the standards streamlining effort in the future.
For more information, contact Jennifer Devolites, jennifer.devolites@nasa.gov
NASA Uses Small Engine to Enhance Sustainable Jet Research
3 min read
Preparations for Next Moonwalk Simulations Underway (and Underwater) The DGEN380 Aero-Propulsion Research Turbofan (DART) is a small-scale jet engine NASA uses to test new aviation technology. DART is seen here inside its host facility, the Aero-Acoustic Propulsion Laboratory at NASA’s Glenn Research Center in Cleveland. This soundproofed chamber ensures researchers can understand the level of noise the engine is producing, as well as keeping the volume low outside.NASA/Bridget CaswellLocated inside a high-tech NASA laboratory in Cleveland is something you could almost miss at first glance: a small-scale, fully operational jet engine to test new technology that could make aviation more sustainable.
The engine’s smaller size and modestly equipped test stand means researchers and engineers can try out newly designed engine components less expensively compared to using a more costly full-scale jet engine test rig.
Named DGEN380 Aero-Propulsion Research Turbofan, or DART, the engine is tiny enough to fit on a kitchen table, measuring at just 4.3 feet (1.3 meters) long. That’s about half the length of engines used on single-aisle airliners.
DART – not to be confused with NASA’s asteroid redirect mission of the same name – enables the agency to boost its sustainable aviation technology research because of its accessibility.
A hidden gem located inside the Aero-Acoustic Propulsion Laboratory at NASA’s Glenn Research Center in Cleveland, the DART engine was made by a French company named Price Induction (now Akira) and was acquired by NASA in 2017.
“DART’s small size makes it appealing,” said Dan Sutliff, who coordinates research for the engine at NASA Glenn. “It’s a great way to explore new technology that hasn’t yet reached the level of a full-scale operation.”
Small Steps Towards Big GoalsSeveral key NASA activities studying jet engines used DART in the past.
For example, it helped researchers learn more about incorporating materials that can help reduce engine noise. These technologies could be incorporated for use in next-generation airliners to make them quieter.
Now, NASA researchers plan to use the DART engine to investigate ideas that could help develop new ultra-efficient airliners for use during the 2030s and beyond. If all goes well, the technology could proceed to more exhaustive tests involving larger facilities such as NASA’s wind tunnels.
“DART is a critical bridge between a design and a wind tunnel test,” Sutliff said. “Technologies that work well here have a greater chance of achieving successful inclusion on future aircraft engines. The test rig helps NASA save resources and contribute to protecting our environment.”
DART tests are run from the Mobile Control Unit – a large van converted into a high-tech control facility with video monitors reporting live data from the engine. In this image, two engineers supervise an engine test, with the nearest researcher operating DART’s thrust lever.NASA/Bridget CaswellAmong its features, DART has a high bypass ratio, which is a measure of how much air passes through the turbofan and around the main core of the engine as opposed to entering it. Having a high bypass ratio means that DART is more characteristic of larger high-bypass ratio engines on commercial aircraft.
This design is more fuel efficient than other jet engines and makes DART ideal for testing new propulsion methods alongside NASA’s efforts in developing a small-core, fuel efficient jet engine for commercial airliners in the 2030s.
The DART engine also can test many other aspects of a jet engine including engine noise, operating controls, coatings used to protect engine parts, sensors and other instrumentation, and much more.
More information can be found on NASA’s Aero-Acoustic Propulsion Laboratory webpage.
About the AuthorJohn GouldAeronautics Research Mission DirectorateJohn Gould is a member of NASA Aeronautics' Strategic Communications team at NASA Headquarters in Washington, DC. He is dedicated to public service and NASA’s leading role in scientific exploration. Prior to working for NASA Aeronautics, he was a spaceflight historian and writer, having a lifelong passion for space and aviation.
Facebook logo @NASA @NASA Instagram logo @NASA Linkedin logo @NASA Explore More 5 min read Updates from NASA’s HyTEC Engine Core Project Show Progress Article 11 months ago 3 min read Sustainable Flight National Partnership Article 2 years ago 5 min read University Researchers Moving Electrified Aviation Forward with NASA Article 1 year ago Keep Exploring Discover More Topics From NASAMissions
Humans in Space
Climate Change
Aeronautics STEM
Share Details Last Updated Apr 26, 2024 EditorJim BankeContactBrian Newbacherbrian.t.newbacher@nasa.gov Related Terms
