Feed aggregator

4 min read

Preparations for Next Moonwalk Simulations Underway (and Underwater) NASA conducted a full-duration RS-25 hot fire April 3 on the Fred Haise Test Stand at NASA’s Stennis Space Center near Bay St. Louis, Mississippi, achieving a major milestone for future Artemis flights of NASA’s SLS (Space Launch System) rocket. It marked the final test of a 12-test series to certify production of new RS-25 engines by lead contractor Aerojet Rocketdyne, an L3Harris Technologies company, to help power NASA’s SLS rocket on Artemis missions to the Moon and beyond, beginning with Artemis V. NASA/Danny Nowlin Crews transport RS-25 developmental engine E0525 to the Fred Haise Test Stand at NASA’s Stennis Space Center on Aug. 30, 2023, for the second and final certification test series.NASA/Danny Nowlin A crane lifts developmental engine E0525 onto the Fred Haise Test Stand at NASA’s Stennis Space Center on Aug. 30, 2023, in preparation for a series of 12 tests to collect performance data for lead SLS (Space Launch System) engines contractor Aerojet Rocketdyne, an L3Harris Technologies company, to produce engines that will help power the SLS rocket, beginning with Artemis V.NASA/Danny Nowlin Crews prepare to place RS-25 engine E0525 on the engine vertical installer on the Fred Haise Test Stand at NASA’s Stennis Space Center on Aug. 30, 2023. NASA/Danny Nowlin Team members ready RS-25 engine E0525 for full installation on the Fred Haise Test Stand at NASA’s Stennis Space Center on Aug. 30, 2023, for a second certification test series to collect data for the final RS-25 design certification review.NASA/Danny Nowlin The second – and final – RS-25 certification test series begins Oct. 17, 2023. When the liquid hydrogen and liquid oxygen propellants mix and ignite, an extremely high temperature exhaust, of up to 6,000-degrees Fahrenheit, mixes with water to form steam that exits the flame deflector and rises into the atmosphere, forming a cloud that subsequently cools.NASA/Danny Nowlin A cloud of steam is visible at NASA’s Stennis Space Center during an Oct. 17, 2023, hot fire that marks the first test in the critical series to support future SLS (Space Launch System) missions to deep space.NASA/Danny Nowlin An RS-25 hot fire at NASA’s Stennis Space Center on Nov. 15, 2023, marks the second test of a 12-test engine certification series. The NASA Stennis test team typically fires the certification engine for 500 seconds, the same amount of time engines must fire to help launch the SLS (Space Launch System) rocket to space with astronauts aboard the Orion spacecraft. NASA/Danny Nowlin Operators fire the RS-25 engine at NASA’s Stennis Space Center on Nov. 15, 2023, up to the 113% power level. The first four Artemis missions are using modified space shuttle main engines that can power up to 109% of their rated level. New RS-25 engines will power up to the 111% level to provide additional thrust, so testing up to the 113% power level provides a margin of operational safety.NASA/Danny Nowlin NASA demonstrates a key RS-25 engine capability necessary for flight of the SLS (Space Launch System) rocket during a hot fire on Nov. 29, 2023. Crews gimbaled, or pivoted, the RS-25 engine around a central point during the almost 11-minute (650 seconds) hot fire on the Fred Haise Test Stand at NASA’s Stennis Space Center.NASA/Danny Nowlin The first RS-25 engine test of 2024 takes place on Jan. 17, 2024, at NASA’s Stennis Space Center as crews complete a 500-second hot fire on the Fred Haise Test Stand. NASA/Danny Nowlin A remote field camera offers a head-on view of an RS-25 engine hot fire on the Fred Haise Test Stand at NASA’s Stennis Space Center on Jan. 23, 2024.NASA/Danny Nowlin NASA marks the halfway point of its second RS-25 certification series on Jan. 27, 2024, with the sixth test of the series on the Fred Haise Test Stand at NASA’s Stennis Space Center. For each Artemis mission, four RS-25 engines, along with a pair of solid rocket boosters, power the SLS (Space Launch System) rocket, producing more than 8.8 million pounds of thrust at liftoff. NASA/Danny Nowlin Teams at NASA’s Stennis Space Center install a second production nozzle, left, on Feb. 6, 2024, to gather additional performance data on the RS-25 certification engine at the Fred Haise Test Stand.NASA/Danny Nowlin A new RS-25 engine production nozzle is lifted on the Fred Haise Test Stand at NASA’s Stennis Space Center on Feb. 6, 2024. Crews used specially adapted procedures and tools to swap out the nozzles with the engine in place on the stand.NASA/Danny Nowlin Operators fire RS-25 engine E0525 for 550 seconds and up to a power level of 113% on the Fred Haise Test Stand at NASA’s Stennis Space Center on Feb. 23, 2024. The hot fire test was the first featuring a new engine nozzle, allowing engineers to collect and compare performance data on a second production unit.NASA/Danny Nowlin The third RS-25 hot fire of 600 seconds or more is conducted March 6, 2024, at NASA’s Stennis Space Center. The full-duration test on the Fred Haise Test Stand marked the ninth in a 12-test certification series for production of new engines to help power NASA’s SLS (Space Launch System) rocket on Artemis missions to the Moon and beyond, beginning with Artemis V. NASA/Danny Nowlin The test team at NASA’s Stennis Space Center conduct the first RS-25 hot fire of spring 2024 on March 22, powering the engine for a full duration 500 seconds and up to a power level of 113%.NASA/Danny Nowlin NASA closes in on a milestone for production of new RS-25 engines to help power future Artemis missions to the Moon and beyond following a successful full duration test on March 27, 2024, at NASA’s Stennis Space Center. The hot fire marked the 11th test of a 12-test series.NASA/Danny Nowlin NASA conducted a full-duration RS-25 hot fire April 3 on the Fred Haise Test Stand at NASA’s Stennis Space Center near Bay St. Louis, Mississippi.NASA/Danny Nowlin

NASA achieved a major milestone April 3 for production of new RS-25 engines to help power its Artemis campaign to the Moon and beyond with completion of a critical engine certification test series at NASA’s Stennis Space Center near Bay St. Louis, Mississippi.

The 12-test series represents a key step for lead engines contractor Aerojet Rocketdyne, an L3Harris Technologies company, to build new RS-25 engines, using modern processes and manufacturing techniques, for NASA’s SLS (Space Launch System) rockets that will power future lunar missions, beginning with Artemis V.

“The conclusion of the certification test series at NASA Stennis is just the beginning for the next generation of RS-25 engines that will help power human spaceflight for Artemis,” said Johnny Heflin, SLS liquid engines manager. “The newly produced engines on future SLS rockets will maintain the high reliability and safe flight operational legacy the RS-25 is known for while enabling more affordable high-performance engines for the next era of deep space exploration.”

Through Artemis, NASA will establish the foundation for long-term scientific exploration at the Moon; land the first woman, first person of color, and first international partner astronaut on the lunar surface; and prepare for human expeditions to Mars for the benefit of all.

Contributing to that effort, the NASA Stennis test team conducted a full-duration, 500-second hot fire to complete the 12-test series on developmental engine E0525, providing critical performance data for the final RS-25 design certification review. The April 3 hot fire completed a test series that began in October 2023.

RS-25 engines are evolved space shuttle main engines, upgraded with new components to produce the additional power needed to help launch NASA’s SLS rocket. The first four Artemis missions are using modified space shuttle main engines also tested at NASA Stennis. For each Artemis mission, four RS-25 engines, along with a pair of solid rocket boosters, power the SLS rocket, producing more than 8.8 million pounds of total combined thrust at liftoff.

“This was a critical test series, and credit goes to the entire test team for their dedication and unique skills that allowed us to meet the schedule and provide the needed performance data,” said Chip Ellis, project manager for RS-25 testing at NASA Stennis. “The tests conducted at NASA Stennis help ensure the safety of our astronauts and their future mission success. We are proud to be part of the Artemis mission.”

The E0525 developmental engine featured new key components – including a nozzle, hydraulic actuators, flex ducts, and turbopumps – that matched design features of those used during an initial certification test series completed at NASA Stennis last summer.

The two certification test series helped verify the new engine components meet all Artemis flight requirements moving forward. Aerojet Rocketdyne is using techniques such as 3D printing to produce new RS-25 engines more efficiently, while maintaining high performance and reliability. NASA has awarded the company contracts to provide 24 new engines, supporting SLS launches for Artemis V through Artemis IX.

“Successfully completing this rigorous test series is a testament to the outstanding work done by the team to design, implement and test this upgraded version of the RS-25 that reduces the cost by 30% from the space shuttle program,” said Mike Lauer, RS-25 program director at Aerojet Rocketdyne. “We tested the new RS-25 engines to the extreme limits of operation to ensure the engines can operate at a higher power level needed for SLS and complete the mission with margin.”

RS-25 Final Certification Test Series by the Numbers

All RS-25 engines are tested and proven flightworthy at NASA Stennis prior to use on Artemis missions. RS-25 tests at the center are conducted by a diverse team of operators from NASA, Aerojet Rocketdyne, and Syncom Space Services, prime contractor for site facilities and operations.

Facebook logo @NASASTENNIS @NASASTENNIS Instagram logo @NASASTENNIS Share

Details Last Updated Apr 04, 2024 EditorNASA Stennis CommunicationsContactC. Lacy Thompsoncalvin.l.thompson@nasa.gov / (228) 688-3333LocationStennis Space Center Related Terms

• Stennis Space Center
• Marshall Space Flight Center
• Space Launch System (SLS)

Explore More 3 min read NASA to Continue Testing for New Artemis Moon Rocket Engines Article 1 month ago 2 min read NASA Marks Halfway Point for Artemis Moon Rocket Engine Certification Series Article 2 months ago 3 min read NASA Stennis Continues Preparations for Future Artemis Testing Article 4 months ago Keep Exploring Discover More Topics from NASA Stennis

Doing Business with NASA Stennis

About NASA Stennis

Visit NASA Stennis

NASA Stennis Media Resources

A network of sensors stretching from San Francisco to Sonoma county’s vineyards shows that electric vehicles have helped lower carbon emissions by almost 2 per cent per year within the Bay Area

A network of sensors stretching from San Francisco to Sonoma county’s vineyards shows that electric vehicles have helped lower carbon emissions by almost 2 per cent per year within the Bay Area

On April 8, 2024, North America will witness its last total solar eclipse for more than twenty years. Other parts of the world will experience the rare celestial event in the coming decade. A total solar eclipse occurs when the Moon passes directly between the Sun and the Earth, blocking its disk from view but making its corona visible in a dazzling display. Although spectacular when seen from the ground, observed from space, solar eclipses appear as large shadows moving across the face of the Earth. The unique geometry of the Earth-Sun-Moon system allows total solar eclipses to occur. Eclipses also occur outside the Earth-Moon system, although the geometries of those worlds rarely if ever produce the stunning display visible on Earth. Spacecraft exploring other worlds have documented these extraterrestrial eclipses.

Left: Schematic geometry of a solar eclipse; sizes and distances not to scale. Right: Path of the April 8, 2024, total solar eclipse. Image credit: courtesy Sky & Telescope.

A solar eclipse occurs when the Moon passes between the Sun and the Earth, with the Moon casting its  shadow on its home planet. Although the Sun is much larger than the Moon, it is also much farther away. As seen from Earth, the Sun and Moon have roughly the same angular diameter and appear roughly the same size in the sky. A total eclipse occurs when the Moon blocks out the Sun’s disk entirely. Because the Moon does not orbit in a perfect circle around the Earth, it appears smaller at its farthest point thus creating annular eclipses. Moons around other planets can also create eclipses although their different sizes relative to the Sun do not create our familiar eclipses. Planets with multiple moons can have more than one eclipse occur at the same time.

Left: Gemini XII astronauts photograph the total solar eclipse from Earth orbit in November 1966. Middle: Surveyor 3 observes a solar eclipse from the Moon in April 1967. Right: In November 1969, Apollo 12 astronauts returning from Moon experienced a solar eclipse as the Earth blocked the Sun shortly before splashdown.

Gemini XII astronauts James A. Lovell and Edwin E. “Buzz” Aldrin for the first time photographed a solar eclipse from Earth orbit on Nov. 12, 1966. Sixteen hours into their flight, the nearly total eclipse came into view as they flew over the Galapagos Islands and Aldrin took several photographs and a short film clip. Calculations showed that Gemini XII passed within 3.4 miles of the center of the eclipse’s path that traversed South America. The Surveyor 3 spacecraft observed the first solar eclipse from the Moon on April 24, 1967. Unlike solar eclipses observed on Earth, this time the Earth itself blocked the Sun – observers on Earth saw the event as a lunar eclipse as the Moon passed through the Earth’s shadow.  In November 1969, as Apollo 12 astronauts Charles “Pete” Conrad, Richard F. Gordon, and Alan L. Bean neared Earth on their return from the second lunar landing – during which they visited Surveyor 3 –  orbital mechanics had a show in store for them. Their trajectory passed through Earth’s shadow, treating them to a total solar eclipse. From their perspective, the Earth appeared about 15 times larger than the Sun. Gordon radioed Mission Control, “We’re getting a spectacular view at eclipse,” and Bean proclaimed it a “fantastic sight.” Conrad reported on the rapidly changing scenery, with the Sun illuminating the Earth’s atmosphere in a 360-degree ring with ever-changing colors while the planet remained pitch black. In the darkness, they could see flashes of lightning in thunderstorms appearing as fireflies. As their eyes adapted to the dark portion of the Earth, they saw landmasses such as India and even city lights. In the center of the Earth’s dark disc they reported seeing a large bright circle that turned out to be the glint of the full Moon reflecting off the Indian Ocean.

Left: The Moon’s shadow photographed from Mir during the August 1999 eclipse. Image credit: courtesy French space agency CNES. Middle: NASA astronaut Donald R. Pettit observed the first solar eclipse from the International Space Station during Expedition 6 in December 2002. Right: Pettit’s second eclipse during Expedition 31 in May 2012.

The credit belongs to French astronaut Jean-Pierre Haigneré for taking the first photograph from Earth orbit of the Moon’s shadow during a solar eclipse. He photographed the Aug. 11, 1999, total eclipse pass over England while onboard the Russian space station Mir as an Expedition 27 flight engineer. NASA astronaut Donald R. Pettit claims the title as the first person to photograph an eclipse from the International Space Station when he observed the Dec. 2, 2002, total eclipse during Expedition 6. As an additional claim, on May 20, 2012, Pettit observed his second eclipse from the space station during Expedition 31, this one an annular eclipse over the Western Pacific Ocean.

Left: Expedition 12 image of the March 2006 total eclipse over the eastern Mediterranean Sea. Middle: Expedition 52 image of the August 2017 total eclipse over North America. Right: Expedition 63 image of the June 2020 annular eclipse.

Left and middle: Two views of the eclipse over Antarctica in December 2021, from the Expedition 66 crew aboard the space station, left, and from the Deep Space Climate Observatory (DSCOVR) satellite. Right: DSCOVR image of the October 2023 annular solar eclipse over North America.

Space station crews have observed and documented a number of solar eclipses in addition to Pettit’s two sightings, their ability to see the Moon’s shadow as it traverses the Earth’s surface determined by their orbital trajectory. Expedition 12 observed the total eclipse on March 29, 2006, Expedition 43 documented the total eclipse on March 25, 2015, Expedition 52 observed the most recent total eclipse visible from North America on Aug. 21, 2017, Expedition 61 observed the annular eclipse on Dec. 26, 2019, Expedition 63 saw the annular eclipse on June 21, 2020, Expedition 66 imaged the total eclipse over Antarctica on Dec. 4, 2021, and Expedition 70 viewed the annular eclipse visible in North America on Oct. 14, 2023. Positioned nearly one million miles away at the L1 Earth-Sun Lagrange point, the National Oceanic and Atmospheric Administration’s Deep Space Climate Observatory (DSCOVR) satellite keeps a watchful eye on Earth’s climate. NASA’s Earth Polychromatic Imaging Camera (EPIC), a camera and telescope aboard DSCOVR, has taken stunning images of the Moon’s shadow during eclipses as well as the Moon transiting across the face of the Earth.

Mars

Beyond the Earth-Moon system, eclipses do not occur on Mercury and Venus since they lack natural satellites to block out the Sun. Mars has two small satellites, Phobos and Deimos, both too small to fully eclipse the Sun, even though it appears only half as big as on Earth. Several rovers have captured Phobos and Deimos as they form annular eclipses. Some astronomers contend that due to the small sizes of the Martian satellites, especially Deimos, compared to the Sun, these are technically transits, not eclipses, but no formal definition exists. The Mars Exploration Rover Opportunity imaged the first eclipses from the surface of Mars shortly after its arrival on the planet, first of Deimos on March 4, 2004, followed by Phobos three days later. More recently, the Mars 2020 Perseverance rover imaged the annular eclipse of Phobos on April 20, 2022, and the eclipse (or transit) of Deimos on Jan. 22, 2024.

Left: Mars Exploration Rover Opportunity images of Deimos, left, and Phobos crossing in front of the Sun. Middle: Perseverance image of a Phobos annular eclipse in April 2022. Right: Perseverance image of a Deimos eclipse (or transit) in January 2024.

Jupiter

Left: Hubble Space Telescope infrared image of a triple eclipse on Jupiter on March 28, 2004, with moons Ganymede, Io, and Callisto casting shadows on the planet. Middle: Hubble Space Telescope image of the Jan. 24, 2015, multiple eclipse on Jupiter, with five of its moons – Callisto, Io, Europa, Amalthea, and Thebe – casting shadows on the planet. Right: Europa eclipses Io in December 2014, as observed through an Earth-based telescope. Image credit: courtesy Jen Miller and Joy Chavez, Gemini Observatory.

Since the outer gas giant planets do not have solid surfaces, no spacecraft has imaged an actual eclipse by one of the multitude of moons orbiting these worlds. What we can observe, through ground-based and orbiting telescopes and spacecraft are the shadows cast by the moons on their home planets. Eclipses on Jupiter are not exceptionally rare given the planet’s large size compared to its many moons and greater distance from the Sun. Only five of Jupiter’s moons, Amalthea, Io, Europe, Ganymede, and Callisto are either large enough or close enough to the planet to completely occult the Sun. And given the low tilts of the moons’ orbits, they cast a shadow on every revolution. Double, triple and multiple simultaneous eclipses are not uncommon. The Hubble Space Telescope has observed numerous such events. Given the number of Jupiter’s moons, especially the four large Galilean moons, and that their orbits all lie very close to Jupiter’s equatorial plane, they occasionally eclipse each other, with the outer moons passing between the Sun and the inner moons. When Earth passes through Jupiter’s equatorial plane, fortunate observers can capture these rare events using ground-based telescopes, sometimes accidentally as they observe the Galilean moons for other reasons.

Left: Juno image of Io’s shadow on Jupiter in September 2019. Right: Juno image of Jupiter’s moon Ganymede casting its shadow on the planet in February 2022.

The Juno spacecraft, in orbit around Jupiter since 2016, has returned stunning images of Jupiter’s cloud patterns. On Sept. 11, 2019, it captured a spectacular image of Io’s shadow on Jupiter’s colorful cloud tops. On Feb. 25, 2022, Juno imaged the largest moon Ganymede’s shadow.

Saturn and beyond

Left: As it orbited Saturn, in November 2009 Cassini imaged eclipses of moons Titan, center, and Enceladus, lower right of Titan, and the planet’s rings. Middle: Titan casts its shadow, elongated by the planet’s curvature, on Saturn in this November 2009 image from the Cassini orbiter. Right: Sequential Hubble Space Telescope February 2009 images of a quadruple eclipse, as Saturn’s moons Enceladus, Dione, Titan, and Mimas cast their shadows on the planet.

Like Jupiter, dozens of moons orbit around the ringed planet Saturn, providing ample opportunities for telescopes and spacecraft to observe them passing in front of and casting their shadows onto the planet. The Cassini spacecraft, in orbit around Saturn between 2004 and 2017, captured thousands of images of the planet, its rings, and its moons. On many occasions, Cassini passed behind the planet and its moons, creating artificial eclipses, while at other times the spacecraft imaged the moons’ shadows on the planet’s cloud tops. The Hubble Space Telescope captured a series of images of a rare quadruple eclipse on Feb. 24, 2009, as Saturn’s moons Enceladus, Dione, Titan, and Mimas transited across the planet, casting their shadows on the cloud tops.

The Cassini spacecraft created this artificial eclipse of Saturn in November 2013 as it traveled beyond Saturn during one of its orbits, with many objects, including Earth, made visible.

On July 19, 2013, Cassini took a series of images from a distance of about 750,000 miles as Saturn eclipsed the Sun. In the event dubbed The Day the Earth Smiled, people on Earth received notification in advance that Cassini would be taking their picture from 900 million miles away, and were encouraged to smile at its camera. In addition to the Earth and Moon, Cassini captured Venus, Mars, and seven of Saturn’s satellites in the photograph.

Left: Composite image showing the relative apparent sizes of the Sun and a selection of planetary moons. Image credit: courtesy sdoisgo.blogspot.com. Middle: July 2006 Hubble Space Telescope image of Uranus and its moon Ariel casting a shadow on the planet. Right: The New Horizons spacecraft created an artificial eclipse as it flew behind Pluto during its July 2015 flyby, the Sun’s rays highlighting its tenuous atmosphere.

The Earth occupies a unique position with the nearly equal apparent diameters of the Moon and the Sun, providing opportunities for annular and total solar eclipses. As viewed from planets farther in the solar system, the Sun’s apparent diameter diminishes, with the apparent sizes of the moons orbiting those planets either larger or smaller than the Sun. Eclipses as we know them do not exist elsewhere in the solar system. Spacecraft exploring those remote worlds easily create artificial eclipses by passing through the planets’ shadows, often revealing important information, such as New Horizons imaging the tenuous atmosphere surrounding Pluto.

Paths of solar eclipses between 2021 and 2030. Image credit: courtesy Greatamericaneclipse.com.

The next total solar eclipse visible in North America will not occur until 2044, but over the next few years, several eclipses visible in other parts of the world will no doubt be targets of opportunity for astronauts’ cameras aboard the space station. And spacecraft exploring planets in the solar system will continue to document eclipses in those faraway places.

Explore More 7 min read 65 Years Ago: NASA Selects America’s First Astronauts Article 2 days ago 6 min read 45 Years Ago: Space Shuttle Columbia Arrives at NASA’s Kennedy Space Center Article 2 weeks ago 21 min read 55 Years Ago: Four Months Until the Moon Landing Article 2 weeks ago

Image: 3D-bioprinted blood vessel

Looping through the Jovian system in the late 1990s, the

Video: 00:02:35

Europe’s next rocket, Ariane 6, passed all its qualification tests in preparation for its first flight, and the full-scale test model has been removed from the launch pad to make way for the real rocket that will ascend to space.

The test model at Europe’s Spaceport in Kourou, French Guiana, stood 62 m high. It is exactly the same as the ‘production model’ Ariane 6 rockets that will soon be launched, except that its boosters do not need to be tested as part of the complete rocket, so the boosters are not fuelled.

Teams preparing Ariane 6 for its inaugural flight successfully completed for the first time a launcher preparation and countdown sequence, on 18 July. Representatives of ESA, Ariane 6 prime contractor ArianeGroup and launch base prime contractor and test conductor CNES completed important objectives for system qualification and performed a series of actions fully representative of a launch chronology.

The launch simulation included the removal of the mobile gantry, the chill-down of ground and launcher fluidic systems, the filling of the upper and core stage tanks with liquid hydrogen (–253°C) and liquid oxygen (–183°C), and at the end of the test, the successful completion of a launch chronology up to the ignition of the Vulcain 2.1 engine thrust chamber by the ground system.

On 5 September 2023 the Vulcain 2.1 engine was ignited, fired for four seconds as planned and switched off before its liquid oxygen and liquid hydrogen fuels were drained to their separate underground tanks. The exercise showed again that the system can be kept safe in the event of a launch abort, as already demonstrated during the 18 July test.

A nighttime full-scale wet rehearsal for Ariane 6 was completed on 24 October 2023, the rocket was fuelled and then drained of its fuel. The test lasted over 30 hours with three teams working in shifts of 10 hours each.

A major full-scale rehearsal was conducted on 23 November 2023 in preparation for its first flight, when teams on the ground went through a complete launch countdown followed by a seven-minute full firing of the core stage’s engine, as it would fire on a launch into space.

A third combined test loading occurred on 15 December 2024 that included a launch countdown to qualify the launch system in degraded conditions and ensure its robustness in preparation for operations. This test sequence included qualification tests of several launch system functions in case of aborted launch and included one ignition of the Vulcain 2.1 engine thrust chamber. It was the fifth countdown run to include loading Ariane 6 with cryo-propellants since July.

On 30 January 2024, the cryogenic connection system passed a last system test of the liftoff disconnection operations lines – the yellow arms supporting the fuel lines to the upper stage to power the Vinci orbital engine. Simultaneously at the bottom of the central core the connection system for the main stage also disconnected.

On 5 February, it was the turn of the electrical umbilical lines to be disconnected. These lines supply the launcher and the satellites inside Ariane 6 with electrical power but also host the digital signals for communications with the informatics system as well as carrying sensor information to ensure the flight system is in good shape for liftoff.

The largest components for the first flight model of Europe’s new rocket Ariane 6 arrived at the port of Pariacabo in Kourou, French Guiana on 21 February 2024 via the novel ship, Canopée (canopy in French). The Ariane 6 stages and components are all manufactured across Europe.

The two central stages for Ariane 6’s first flight were then assembled in the launcher assembly building (BAL) at Europe’s Spaceport. The core stage and the upper stage for Europe’s new rocket Ariane 6 are set to fly in the Summer of 2024. Once assembled, the stages will be transferred to the launch pad.

Watch the total solar eclipse — alongside interviews with scientists and astronauts — with these livestreams.

The post Where to Watch the Total Solar Eclipse Online appeared first on Sky & Telescope.

An Alabama court ruling that human embryos outside the uterus should be regarded as children has raised concerns among doctors and scientists about the future of the fertility treatment in vitro fertilization

Predicting what the sun will look like during a total solar eclipse is a helpful exercise for scientists in the long quest to understand how our star works

From the time I learned to read, I have experienced a form of mental closed-captioning called ticker-tape synesthesia

Hot on the heels of its predecessor, the DJI Mini 4 Pro emerges as the best sub-250g drone money can buy.

Protected zones are meant to let adult fish populations recover from overfishing, but an analysis of 111 sites in the Caribbean finds that this is not happening in most cases

Protected zones are meant to let adult fish populations recover from overfishing, but an analysis of 111 sites in the Caribbean finds that this is not happening in most cases

A bunch of breweries in the path of totality for the April 8 total solar eclipse have created special beers for the surreal event.

ESA’s new Arctic Weather Satellite has taken centre stage at OHB’s facilities in Stockholm, Sweden, before the spacecraft is packed up and shipped to California, US, for a launch currently scheduled for June.

Embracing the New Space approach to demonstrate new concepts in a cost-effective and timely manner, the Arctic Weather Satellite has been designed to show how it can improve weather forecasts in the Arctic.

Video: 00:03:01

Watch the first episode of the ExoMars Rosalind Franklin rover mission – Europe’s ambitious exploration journey to search for past and present signs of life on Mars.

This episode starts after a successful descent and landing on the Red Planet in 2030.

Rovers on Mars have previously been caught in loose soils, and turning the wheels dug them deeper, just like a car stuck in sand. To avoid this, Rosalind Franklin has a unique wheel-walking locomotion mode to to overcome difficult terrains, as well as autonomous navigation software.

A major goal of the mission is to understand the geological context and identify minerals formed in the presence of water that could be good targets for drilling into and collecting samples for analysis.

The scientific eyes of the rover are set atop the mast on the Panoramic Camera suite, known as PanCam. From its vantage point about two metres above the ground, PanCam cameras come into play to get a whole picture of the site with high resolution imaging.

Enfys, meaning rainbow in Welsh, is an infrared spectrometer to study mineral composition. Enfys and PanCam work in synergy. PanCam is used to obtain colour, visual information of what lies around the rover. Enfys’ job is to inform scientists what the minerals are.

Rosalind Franklin will be the first rover to reach a depth of up to two metres deep below the surface, acquiring samples that have been protected from surface radiation and extreme temperatures.

The mission will serve to demonstrate key technologies that Europe needs to master for future planetary exploration missions.

This episode shows the spacecraft, the rover and martian landscapes are as true to reality as possible for a simulation.

Check ESA’s ExoMars website and our frequently asked questions for the latest updates.

Credits:

Production: Mlabspace for ESA

3D animation: ESA/Mlabspace

Video footage: ESA/NASA, Shutterstock

Music composed by Valentin Joudrier

On 8 April 2024, a great swath of the United States and Mexico will experience a total solar eclipse, with viewers getting the rare chance to see the Sun’s stunning outer atmosphere.

Some of the biggest names in aerospace — and the automotive industry — will play roles in putting NASA astronauts in the driver’s seat for roving around on the moon.

The space agency today selected three teams to develop the capabilities for a lunar terrain vehicle, or LTV, which astronauts could use during Artemis missions to the moon starting with Artemis 5. That mission is currently scheduled for 2029, three years after the projected date for Artemis’ first crewed lunar landing.

The teams’ leading companies may not yet be household names outside the space community: Intuitive Machines, Lunar Outpost and Venturi Astrolab. But each of those ventures has more established companies as their teammates.

Over the next 15 years, the three teams will be eligible to work on task orders amounting to a potential total value of $4.6 billion — with the aim of providing mobility technology for crewed and uncrewed moon rovers. The marquee vehicle would be a rover capable of carrying Artemis astronauts on journeys of exploration around the lunar surface, as well as taking robotic trips on its own.

“We look forward to the development of the Artemis generation lunar exploration vehicle to help us advance what we learn at the moon,” Vanessa Wyche, director of NASA’s Johnson Space Center in Houston, said today in a news release. “This vehicle will greatly increase our astronauts’ ability to explore and conduct science on the lunar surface while also serving as a science platform between crewed missions.”

In a posting to X / Twitter, NASA Administrator Bill Nelson said the LTV rover is “essential to the success of Artemis.”

After the teams conduct year-long feasibility studies, NASA plans to select one of the teams to go ahead with construction and testing of its LTV, leading up to a lunar demonstration mission in advance of Artemis 5. NASA could give the teams additional task orders to fill its needs for unpressurized rover capabilities on the moon through 2039.

Texas-based Intuitive Machines is best-known for putting a robotic lander on the lunar surface in February. A couple of its teammates — Boeing and Northrop Grumman — have moon-mission experience that goes back to the Apollo era. Michelin (the tire company) and AVL (which provides vehicle testing and simulation services) round out the Moon RACER team.

NASA has awarded Intuitive Machines $30 million as a prime contractor to complete a Lunar Terrain Vehicle Services contract. The company’s global Moon RACER team will be tasked with creating a feasibility roadmap to develop and deploy a Lunar Terrain Vehicle on the Moon using… pic.twitter.com/GaVh3cvrG5

— Intuitive Machines (@Int_Machines) April 3, 2024

Colorado-based Lunar Outpost has already booked three rover missions for delivery to the moon by SpaceX and Intuitive Machines. Its teammates on the Lunar Dawn project include Lockheed Martin, General Motors, Goodyear Tire & Rubber and MDA Space (known for building the robotic arms on NASA’s space shuttles and the International Space Station).

Buckle up, Earthlings!@NASA has selected the Lunar Dawn team to develop a next-generation lunar terrain vehicle for its LTV contract as part of the @NASAArtemis program. pic.twitter.com/blxXrYL0F8

— Lockheed Martin Space (@LMSpace) April 3, 2024

California-based Astrolab made a separate deal last year with SpaceX to have its FLEX rover delivered to the moon aboard a Starship lander for a commercial mission that’s set for as soon as 2026. Astrolab’s teammates on the FLEX LTV project include Axiom Space (which is making spacesuits for Artemis moon missions) and Odyssey Space Research.

NASA has awarded Astrolab and its partners a contract worth up to $1.9 billion to advance the development of the Lunar Terrain Vehicle which will help Artemis astronauts explore more of the Moon’s surface.

Read the full announcement: https://t.co/h9Cwopy5Z5 pic.twitter.com/FJJtq0oiH9

— Astrolab (@Astrolab_Space) April 3, 2024

NASA said the LTV would support the Artemis program’s crewed missions to the moon’s south polar region, plus remote-controlled exploration activities as needed between those missions. “Outside those times, the provider will have the ability to use their LTV for commercial lunar surface activities unrelated to NASA missions,” the space agency said.

With regard to the financial arrangements, NASA said only that the Lunar Terrain Vehicle Services contract had a combined maximum potential value of $4.6 billion for all task-order awards. But a couple of the teams provided additional details. Intuitive Machines said it was awarded $30 million as a prime contractor to complete the initial feasibility study for Moon RACER. And Astrolab said its LTV contract could be worth up to $1.9 billion, depending on NASA’s needs.

The post Start Your Engines: NASA Picks 3 Teams to Work on Lunar Terrain Vehicle appeared first on Universe Today.

NASA's Curiosity rover is now exploring a possible ancient river on Mars named Gediz Vallis.